Baxter Saw Model 360RFA: Fully Automatic Cutting

BAXTER SAW™ – MODEL 360RFA
AUTOMATIC HORIZONTAL BANDSAW
Fully automatic roller feed type bandsaw machine. The machine is an economical solution to repetitive sawing. CNC control, digital setting of length and quantity. Up to 4 lengths and quantities per job. Available in standard, using a 1" blade with a 2 hp drive. Also available in heavy duty version using 1¼” blade with a 5 hp blade drive. Drive systems have motor directly mounted, requiring no belts. Blade speed is controlled by a variable frequency drive.

A machine that is sitting in the dirt.
A machine that is sitting in the sand.
A machine that is sitting on top of a table.
A tablet computer with a screen showing time.

Features included as standard equipment

  • Material is fed via 3 drive rollers
  • Full CNC control of the saw
  • Length of cut is digitally set
  • Cut quantity is digitally set
  • Control screen is a 6” color touch screen
  • Duplicate hard pushbuttons and selector switches to withstand the environment
  • Cut jobs of up to 4 lengths with corresponding quantities
  • Automatic and adjustable blade kerf compensation
  • Length of cut repeatability of +/-1/32"
  • Automatic cut cycle
  • Decrementing parts counter
  • Out of material sensor
  • Dynamic length adjustment for increased accuracy
  • Double column machine for maximum capacity and rigidity
  • Linear bearings for high stiffness and smooth motion
  • Large base for stability with a large coolant catch area
  • Infeed material conveyor with 6 rollers, 52” long
  • Conveniently located control station
  • Cutting feed hydraulically regulated
  • Load sensing valve stops the feed if the blade starts to overload, typically when cutting structural shapes
  • Saw up travel can be set to minimize distance
  • Manual saw control for saw up, saw down, saw cut, material forward, and reverse
  • Magnetic motor starters with thermal overload protection
  • Power disconnect on machine
  • Blade guards
  • Infinitely adjustable blade speed
  • Powered blade brush to remove cutting chips
  • Quick adjusting material clamp
  • Blade guides with carbide faces and rollers to remove blade twist and dampen vibration
  • Flood coolant system to both saw guides with adjustable flow rates
  • Gearbox directly coupled to motor, no belts to wear or adjust
  • All bearings totally enclosed and lubricated for life
  • Electric system uses only CSA/UL approved components and is electrically approved
  • Premium quality bimetal bandsaw blade
  • Instruction and parts manual

Specifications

Round 12″ (305 mm)
Rectangular 14″ x 17″ (355 x 432 mm)
Blade Size 1″ x 13′ 6″ (27 x 4115 mm)
Blade Speeds (ft/min) 60 to 400 (18 to 122 m/min)
Blade Tension (spring compensated) 25,000 psi (172 MPa)
Table Height 29 7/8″ (780 mm)
Maximum Work Load 3,000 lb.(1360 kg)
Machine Weight 1,500 lb. (680 kg)
Overall Dimensions 93 1/2″ X 32″ X 69 1/2″ (2370 X 810 X 1740 mm)
Blade Drive 2 Hp (1.5 kW)
Hydraulic Drive 1 Hp (200 W)
Roller Drive 1/4 Hp (200 W)
Voltages available (three phase) 575, 460, 230 and 208
Heavy Duty 1 1/4" Blade
5 HP Drive Using a Planetary Gearbox
Hydraulic Vise
Variable Vise Pressure
Work Lights
Conveyor
Crating Charges
Download brochure