BAXTER SAW™ – MODEL 600SA-C

HEAVY DUTY SEMI-AUTOMATIC HORIZONTAL BANDSAW

A machine that is sitting in the middle of a room.
A machine that is sitting on the ground.

Features included as standard equipment

  • Double column machine provides maximum capacity and rigidity
  • Blade canted at 4 degrees to aid in cutting structural steel andflats
  • Design utilizes linear bearings for high stiffness and smooth motion
  • Electronic variable speed drive
  • Blade breakage and open door shut off with warning indicator
  • Hydraulic lift of the saw head
  • Saw up travel can be set to minimize distance between the blade and the top of the material
  • Saw down travel limit can be set
  • Semi-auomatic cut cycle. Manual saw control, saw up, rapid saw down, saw cut
  • Cuting feed rate hydraulically adjusted
  • Load sensing valve stops the feed if the blade starts to overload, typical when cutting the web of structural shapes
  • Magnetic motor starter with shut off at the end of the cut, motors thermal overload protection
  • Power disconnect on machine
  • Blade guard. Powered blade brush
  • Hydraulic full stroke vise
  • Adjustable material length stop for repetitive cutting
  • Steel wheels with ductile iron hubs
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
  • Flood coolant system to both saw guides with adjustable flow rates
  • Direct blade drive using a planetary gearbox for a high efficiency drive
  • Electric system uses only C.S.A./UL approved components and is electrically approved
  • Premium quality bimetal bandsaw blade
  • Instruction and parts manual

Specifications

Round 24″ (610 mm)
Rectangular 22″ x 28″ (560 x 710 mm)
Blade size 1 1/2″ x 20′ (41 x 6096 mm)
Blade speeds (ft/min) 60 to 360 ft/min (18 to 110 m/min)
Blade tension (hydraulic) 25,000 psi
Blade guides Carbide with rollers
Table height 26 1/4″ (665 mm)
Maximum work load 6,000 lb. (2700 kg)
Machine Weight 4,100 lb. (1860 kg)
Overall dimensions 119″ x 64″ x 84″ (3020 x 1620 x 130 mm)
Blade drive 7.5 Hp (5 kW)
Hydraulic drive 1 Hp (2.2 kW)
Voltages available (three phase) 575, and 460
Bundle clamping
Variable vise pressure
Laser light cut indicator
Blade on hour meter
Conveyor 10′ long
Conveyor 20′ long
Powered conveyor 10′ long
Work light
Download brochure