BAXTER SAW™ – MODEL 475SA-HD

SEMI-AUTOMATIC BANDSAW

Features included as standard equipment

Double column machine provides maximum capacity and rigidity
Design utilizes linear bearings for high stiffness and smooth motion
Electronic variable speed
Blade breakage and open door automatic shut off with alarm indicator
Hydraulic lift of the saw head
Saw up travel can be set to minimize distance between the blade and the top of the material
Saw down travel can be set to allow notching of blocks
Semi-automatic cut cycle
Manual saw control, saw up, rapid saw down, saw cut
Cutting feed rate hydraulically adjusted
Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
Power disconnect on machine
Blade guards
Magnetic motor starter with automatic shut off at the end of cut, motors thermal overload protection
Powered blade brush to remove cutting chips
Quick acting material clamp
Miter cuts up to 45 degrees by swiveling vise
Adjustable material length stop for repetitive cutting
Steel wheels
Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
Flood coolant system to both saw guides with adjustable flow rates
Direct blade drive using a planetary gear box for a high efficiency design
Electric system uses only C.S.A./UL approved components and is electrically approved
Premium quality bimetal bandsaw blade
Instruction and parts manual

SPECIFICATIONS
Blade size	1 1/2” x 17’5” (41 x 5310 mm)
Blade Speeds (ft/min)	60, to 400 (18 to 122 m/min)
Blade Tension (spring compensated)	30,000 psi (207 MPa)
Blade Guides	Carbide with rollers
Table height	26 1/4″ (660 mm)
Maximum Work Load	4,500 lb. (2050 kg)
Machine Weight	2,8000 lb. (1090 kg)
Overall dimensions	114” x 60” x 96” (2850 x 1525 x 2440 mm)

DRIVE
Blade drive	7 1/2 Hp (5 kW)
Hydraulic Dive	2 Hp (1.5 kW)
Voltages available (three phase)	575, and 460