BAXTER SAW™ – MODEL 475M-HD

HORIZONTAL MITER BANDSAW

Features included as standard equipment

  • Double column machine provides maximum capacity and rigidity
  • Blade angle is at 4° from the horizontal which assists in the cutting of large sections and structural profiles
  • Hydraulic lift of the saw head
  • Hydraulic full stroke vise
  • Hydraulic miter of saw head with digital display of angle
  • Design utilizes linear bearings for high stiffness and smooth motion
  • Electronic variable speed
  • Blade breakage and open door automatic shut off with alarm indicator
  • Saw up travel can be set to minimize distance between the blade and the top of the material
  • Semi-automatic cut cycle
  • Manual saw control, saw up, rapid saw down, saw cut
  • Cutting feed rate hydraulically adjusted with Load sensing valve stops the feed if the blade starts to overload
  • Power disconnect on machine
  • Powered blade brush to remove cutting chips
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
  • Flood coolant system to both saw guides with adjustable flow rates
  • Direct blade drive using a planetary gear box for a high efficiency design
  • Electric system uses only C.S.A./UL approved components and is electrically approved
  • Premium quality bimetal bandsaw blade
  • Instruction and parts manual

Specifications

Round at 0° 18″ (460 mm)
Rectangular at 0° 17 ¼” x 25 ½” (438 x 648 mm)
Rectangular at 45° (max. height) 17 ¼” x 15 ¾” (438 x 400 mm)
Rectangular at 45° (max. width) 13” x 18 ½” (330 x 470 mm)
Rectangular at 60° (max. height) 17 ¼” x 9 ½” (438 x 241 mm)
Rectangular at 60° (max. width) 17 ½” x 15 ¾” (438 x 400 mm)
Blade size 1 ½” x 17’6” (34 x 5030 mm)
Blade Speeds (ft/min) 60, to 400 (18 to 122 m/min)
Blade Tension (spring compensated) 30,000 psi (207 MPa)
Table height 26 ¼” (670 mm)
Maximum Work Load 5,000 lb. (2050 kg)
Machine Weight 2,800 lb. (1090 kg)
Overall dimensions 9’ x 5’ x 8’ (2750 x 1500 x 2400 mm)
Blade drive 7 ½ Hp (3.75 kW)
Hydraulic Dive 2 Hp (1.5 kW)
Voltages available (three phase) 575, and 460
Laser Line Cut Indicator
Variable Vise Pressure
Conveyor 10′ long
Crating Charges