Model 360SA-HD
BAXTER SAW™ – MODEL 360SA-HD
SEMI-AUTOMATIC HORIZONTAL BANDSAW
The model 360SAHD is a rugged double column bandsaw machine ideal for cutting solids. Uses a 1¼” (34mm) blade drive by a 5 hp (3.75 kW) motor. Drive system is a high efficiency planetary gearbox and a directly mounted motor (no belts). Blade speed is controlled by a variable frequency drive.
![A machine that is sitting on the ground.](https://verticut.com/wp-content/uploads/2023/12/A-FRONT-2-scaled.gif)
![A band saw with a large red and yellow handle.](https://verticut.com/wp-content/uploads/2023/12/A-FRONT-LHS.gif)
Features included as standard equipment
- Double column machine provides maximum capacity and rigidity
- Design utilizes linear bearings for high stiffness and smooth motion
- Hydraulic lift of the saw head
- Saw up travel can be set to minimize distance between the blade and the top of the material
- Saw down travel can be set to allow notching of blocks
- Semi-automatic cut cycle
- Manual saw control, saw up, rapid saw down, saw cut
- Direct blade drive system with electronic variable speed control
- Cutting feed rate hydraulically adjusted
- Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
- Magnetic motor starter with automatic shut off at the end of cut, motors thermal overload protection
- Power disconnect on machine
- Blade guards
- Powered blade brush to remove cutting chips
- Quick acting material clamping
- Miter cuts up to 45 degrees by swiveling vise
- Adjustable material length stop for repetitive cutting
- Ductile iron wheel
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Flood coolant system to both saw guides with adjustable flow rates
- High efficiency direct drive planetary gear drive system
- All bearings are totally enclosed and lubricated for life
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
Specifications
Round | 14″ (360 mm) |
Round at 45 degrees | 10 3/4″ (273 mm) |
Rectangular | 14″ x 19″ (360 x 480 mm) |
Blade Size | 1 1/4″ x 14′ 6″ (34 x 4420 mm) |
Blade Speeds (continuously variable) | 60 to 400 ft/min (18 to 122 m/min) |
Blade Tension (spring compensated) | 30,000 psi (207 MPa) |
Blade Guides | Carbide with rollers |
Table Height | 26 1/4″ (660 mm) |
Maximum Work Load | 3,000 lb.(1350 kg) |
Machine Weight | 1,600 lb. (720 kg) |
Overall Dimensions | 7’6” x 4′ x 6′ (2290x1220x1830 mm) |
Blade Drive | 5 Hp (3.75 kW) |
Hydraulic Drive | 1 Hp (.75 kW) |
Voltages available (three phase) | 575, 460, 230 and 208 |
Hydraulic Drive with Hydraulic Vise | 2 Hp (1.5 kW) |
Hydraulic Vise |
Variable Vise Pressure |
Work Lights |
Conveyor |
Crating Charges |