Verticut Model 115C
VERTICUT® – MODEL 115C
GENERAL PURPOSE VERTICAL BANDSAW
Features included as standard equipment
- Can be used as a cut-off saw
- Can rip cut, can notch blocks
- Can contour cut as a tool room saw
- Foot pedal for hands free carriage movement of 4″ (100 mm)
- Graduated scale for depth of cut
- Miter block allows miter cutting of +/- 45º
- C-clamp for clamping of material
- Adjustable cutting force for cutting of solids or structural shapes
- Ground solid steel table
- Heavy duty base for stability and strength
- Ductile iron wheels
- Roller guides are hardened and grooved allowing use of 1/4”, 3/8”, 1/2” and 3/4” (6.4, 9.5, 12.7, 19 mm) blades without any adjustment
- Gear box designed for heavy duty bandsaw machines, precision machined worm and phosphorous bronze worm gear set supported on sealed ball bearings. Oil bath, lubricated for life.
- All bearings are totally enclosed and lubricated for life
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bandsaw blade
- Instruction and parts manual
Specifications
| Round | 10″ (250 mm) |
| Round with maximum 8 1/2″ (216 mm) length | 13″ (330 m) |
| Round at 45 degrees | 7″ (180 mm) |
| Rectangular | 10″ x 13″ (250 x 330 mm) |
| Rip cutting width | 9″ (230 mm) |
| Blade size | 1/4″ to 3/4″ x 10′ (6 to 19 mm x 3050 mm) |
| Blade speeds | 75, 130, 215, 350 ft/min (23, 40m 66, 107 m/min) |
| Blade tension | 25,000 psi (172 MPa) |
| Table height | 33″ (840 mm) |
| Work table (ground solid steel) | 1″ x 18″ x 30″ (24 mm x 460 mm x 760 mm) |
| Machine Weight | 760 lbs (345 kg) |
| Overall dimensions | 34″ x 48″ x 68″ (860 mm x 12250 mm x 1730 mm) |
| Blade drive | 3/4 Hp (.56 kW) |
| Motor starter | Manual |
| Voltage available | 120 Volts |
| Single phase magnetic starter |
| End of cut shut off |
| Electronic variable speed drive (1 Hp) |
| Work light |
| Material stand |
| Conveyor 10′ long |
| Crating charge |
| Adjustable material length stop for repetitive cutting |